Maintenance Of Your Mac Hardware: Apple Hardware Test (recommended)

When you purchased your Macintosh, the box should have included a CD or DVD with an application called Apple Hardware Test. Depending on when you bought your computer, this could be an independent disc, or it may be included on the Mac OS X Install Disc. (Look for tiny lettering on the disc that says "To use Apple Hardware Test, hold down the Option key as the computer starts up," or words to that effect.) Find this disc now.

You have in your hands a very special program. Apple Hardware Test can run only when you start up from the CD or DVD it came on; don't bother trying to copy it to your hard disk. This program performs a series of diagnostic tests on your Mac's hardware, including the AirPort card, logic board, hard drive, RAM, modem, and video RAM.
It doesn't repair anything, and it doesn't look for problems such as directory errors that are the province of Disk Utility. But it can identify subtle hardware defects that could later lead to serious problems. Whether your Mac is fresh out of the box or years old, you owe it to yourself to make sure its major components are in good health, and this is the easiest way to do so.

To run Apple Hardware Test, follow these steps:

1.Insert the disc with Apple Hardware Test on it into your Mac and restart, holding down the Option key until icons appear representing the available startup volumes.

2.Click the Apple Hardware Test icon, and then click the right arrow.

3.After the program loads, select a language and click the right arrow.

4.On the Hardware Tests tab, click Extended Test.

5.Take a nice hot bath or enjoy a stroll around your neighborhood. This test takes a while!
The screen says, "Estimated time: 10-15 minutes, or longer depending on the amount of memory installed." Take the "or longer" part seriously. On a fairly fast test machine with 2 GB of RAM, the test took almost an hour and 45 minutes.

6.If all is well, the word "Passed" appears next to all the applicable tests in the Test Results area. If not, a failure message appears; if this happens, look in the About the Test and Results area for advice.

7.Click Restart to restart your computer.

I recommend running the test again after installing RAM or any other new hardware inside your computer, or if you begin to have inexplicable problems that ordinary disk utilities do not solve.

written by Avipar\\

Technorati Tags: Apple Hardware Test , Mac Maintenance , Mac OS X Backup, Mac OS X for Beginners, Mac OS X Begginers Tips, Mac OS X Ticks, Macintosh OS X Tools, MacOs X leopard, MacOs X Terminal, OS X Tools , Macintosh OS, MacOs X 10.5, MacOS X Software, MacOS X Hints, Free MacOS X, OSX Desktop, Macintosh consulting, MacOS X Apps, Leopard Tricks, OS X Leopard